![System TM](/img/default-banner.jpg)
- 109
- 446 156
System TM
Denmark
Приєднався 2 лис 2011
System TM is a leading global supplier of automated handling systems to the solid wood industry, headquartered in Odder, Denmark. Today, System TM covers 14,000 square meters of administration offices, production and assembly facilities and employs around 160 highly qualified employees.
We are experts at optimizing your staff and wood resources. For more than 40 years, we have been supplying our customers with customized solutions (from production line design and development to installation and staff training) and are continuously providing standout service for countless lines running worldwide.
All our products and solutions are developed to increase your machine capacity and efficiency, while significantly reducing labor cost at the same time. Our material handling systems are available as standard, as well as fully customized solutions, which means we can every customer’s specific needs.
#solidwood #timber #timberprocessing #woodworkingmachinery #woodworkingmachine
We are experts at optimizing your staff and wood resources. For more than 40 years, we have been supplying our customers with customized solutions (from production line design and development to installation and staff training) and are continuously providing standout service for countless lines running worldwide.
All our products and solutions are developed to increase your machine capacity and efficiency, while significantly reducing labor cost at the same time. Our material handling systems are available as standard, as well as fully customized solutions, which means we can every customer’s specific needs.
#solidwood #timber #timberprocessing #woodworkingmachinery #woodworkingmachine
Klejnsmedlærling
HOS SYSTEM TM TILBYDER VI:
• En lærlingeuddannelse med en grundig introduktion til alle aspekter af uddannelsen og branchen.
• En individuel uddannelsesplan, der tilrettelægges af dig og din nærmeste leder.
• Et godt og afslappet arbejdsmiljø med en åben og ærlig omgangstone.
• En attraktiv og spændende læreplads i en af branchens førende virksomheder, hvor du kommer til at samarbejde med kompetente og specialiserede kolleger.
• En lærlingeuddannelse med en grundig introduktion til alle aspekter af uddannelsen og branchen.
• En individuel uddannelsesplan, der tilrettelægges af dig og din nærmeste leder.
• Et godt og afslappet arbejdsmiljø med en åben og ærlig omgangstone.
• En attraktiv og spændende læreplads i en af branchens førende virksomheder, hvor du kommer til at samarbejde med kompetente og specialiserede kolleger.
Переглядів: 225
Відео
Automatikteknikerlærling
Переглядів 2192 місяці тому
HOS SYSTEM TM TILBYDER VI: • En lærlingeuddannelse med en grundig introduktion til alle aspekter af uddannelsen og branchen. • En individuel uddannelsesplan, der tilrettelægges af dig og din nærmeste leder. • Et godt og afslappet arbejdsmiljø med en åben og ærlig omgangstone. • En attraktiv og spændende læreplads i en af branchens førende virksomheder, hvor du kommer til at samarbejde med ...
Opti-Solution - Cross-Cut Line (1464)
Переглядів 7932 місяці тому
This optimizing cross-cut solution consists of two cross-cut saws type Opti-Kap 5103 and four staplers model Opti-Stack 3000. System TM is a leading global supplier of advanced automated handling systems for the solid wood industry. For more than 45 years, we have provided our customers with customized solutions (from line design and development to installation and personnel training) and conti...
Opti-Solution - Cross-Cut and Finger-Jointing Line (1261+1497)
Переглядів 7223 місяці тому
This Opti-Solution for component production consists of a cross-cut line with two Opti-Kap 5103 cross-cut saws and a MiCROTEC Goldeneye quality scanner. The connected Opti-Joint H-200 horizontal finger-jointing line also includes an Opti-Joint 9000 stacking system. System TM is a leading global supplier of advanced automated handling systems for the solid wood industry. For more than 45 years, ...
Opti-Soluton - Opti-Joint H-200 Finger-Jointer (1477)
Переглядів 4123 місяці тому
This Opti-Joint solution includes an Opti-Feed Spin-Feeder for automatic workpiece alignment and an optimizing horizontal finger-jointing system Opti-Joint H-200. It is used for the production of finger-jointed components for interior and exterior softwood and hardwood doors/windows. System TM is a leading global supplier of advanced automated handling systems for the solid wood industry. For m...
Opti-Solution - Ripsaw and Cross-Cut Line (1505)
Переглядів 6273 місяці тому
This versatile, highly optimized ripsaw and cross-cut solution is used to produce a wide variety of products in a single plant. It consists of an Opti-Feed 6000 Vack infeed, an existing moulder that was integrated into the line, a rip saw scanner, rip saw, as well as a cross-cut scanner and Opti-Kap 5103 cross-cut saw. System TM is a leading global supplier of advanced automated handling system...
Opti-Soluton - vertical finger-jointing line Opti-Joint V-8 (1458)
Переглядів 5063 місяці тому
Like all of our Opti-Joint finger-jointing solutions, this vertical finger-jointing line provides a second chance for otherwise unused lengths. As specified by our customer, it consists of a compartment table for manual batch building, an Opti-Joint V-8 vertical finger-jointer with a two-channel press station, and a manual stacking solution. A finger-jointing system is the perfect addition to y...
Opti-Solution - Cross-Cut Line (1438)
Переглядів 9265 місяців тому
This Opti-Kap solution produces finger-joint components for CLT and glue lam production and is optimized to achieve the required workpiece strength and quality. It consists of an Opti-Feed 6000 Vack infeed, 1 x Opti-Kap 3003 cross-cut saw and 3 x Opti-Stack 3000 Vack stackers and includes several MiCROTEC scanning solutions for strength grading. The workpieces are then transfered for further pr...
Opti-Solution - Moulder and Bundler Line
Переглядів 1,5 тис.Рік тому
This is a moulder line with a type Opti-Feed 6000 Vack, planer infeed, a planer, and connected bundler line including automatic stacking by Opti-Stack 9000. Also integrated is a Multi-Kap saw from System TM. System TM is a leading global supplier of customized solutions to the solid wood industry with more than 40 years of experience and more than 300 running lines worldwide. The success of our...
Opti-Solution - Cross-Cut & Finger-Jointing Line H-200 (1393+94)
Переглядів 1,8 тис.Рік тому
This Opti-Solution (cross-cut and finger jointing line) enables the company to optimize their utilization of raw materials and provides the possibility to purchase various qualities of raw materials.
Opti-Solution - Finger-Jointing Line H-200 (1337)
Переглядів 520Рік тому
With the Opti-Joint H-200, you’ll be enjoying maximum precision and excellent jointing quality. If high performance is what you’re looking for, look no further. Our horizontal finger jointer are designed with high-quality mechanical and electrical components. This horizontal finger jointer have at very high attention to operator safety and machine reliability. Let this powerful finger jointer t...
Opti-Solution - Finger-Jointing Line H-200 (1402)
Переглядів 1,7 тис.Рік тому
With the Opti-Joint H-200, you’ll be enjoying maximum precision and excellent jointing quality. If high performance is what you’re looking for, look no further. Our horizontal finger jointer are designed with high-quality mechanical and electrical components. This horizontal finger jointer have at very high attention to operator safety and machine reliability. Let this powerful finger jointer t...
Opti-Solution - Moulder Line (1420)
Переглядів 824Рік тому
This moulder solution consists of an Opti-Feed 6000 tilt-hoist lift, as well as an unscrambler. The workpieces pass through the moulder at 120 m/min. Afterwards, they can be manually sorted before they reach the semi-automatic bundling station. Alternatively, this station can be bypassed and the workpieces can be directly stacked by the Opti-Stack 6000 system and transported on for pickup. Syst...
Opti-Solution - Laminating Line (1455+56)
Переглядів 453Рік тому
System TM is a leading global supplier of customized solutions to the solid wood industry with more than 40 years of experience and more than 300 running lines worldwide. The success of our business is based on our understanding of customer’s needs. We combine the latest technology with our broad technical expertise and knowledge to design the best solution that meets customer specific needs. S...
Opti-Solution - Cross-Cut Line (1438)
Переглядів 641Рік тому
The Opti-Kap optimizing cross-cut saw provides optimal utilization of wood and staff resources, generating higher rates of return and increased production efficiencies.
Opti-Solution - Cross-Cut Line (1397)
Переглядів 1,7 тис.Рік тому
Opti-Solution - Cross-Cut Line (1397)
Opti-Solution - Ripsaw/Bundtler Line (1340)
Переглядів 387Рік тому
Opti-Solution - Ripsaw/Bundtler Line (1340)
Opti-Solution - Finger-Jointing Line V-8 (1374)
Переглядів 662Рік тому
Opti-Solution - Finger-Jointing Line V-8 (1374)
Opti-Solution - Cross-Cut & Finger-Jointing Line V-8 (1399+1400)
Переглядів 585Рік тому
Opti-Solution - Cross-Cut & Finger-Jointing Line V-8 (1399 1400)
Opti-Solution - Cross-Cut & Finger-Jointing Line V-8 (1430+31)
Переглядів 731Рік тому
Opti-Solution - Cross-Cut & Finger-Jointing Line V-8 (1430 31)
Opti-Solution - Cross-Cut & Finger-Joint Line V-8 (1369+70)
Переглядів 300Рік тому
Opti-Solution - Cross-Cut & Finger-Joint Line V-8 (1369 70)
Opti-Solution - Cross-Cut & Finger-Jointing Line V-8 (1416+17+22+23)
Переглядів 322Рік тому
Opti-Solution - Cross-Cut & Finger-Jointing Line V-8 (1416 17 22 23)
木材是先烘干吗
Wahhh luar biasa ini mesin fjk nya otomatis. Berapa duit ini???
We are currently installing a Torwegge finger jointing line at our mill. Very excited to get a break from the Newman planer.
That's great to hear and good luck with that. Finger-jointing wood is a great way to save resources and make better use of wood 😊 If you find that your production needs an upgrade in terms of capacity and yield, give us a call! We'll be happy to help you find your next finger jointing line, but this time from System TM 😉
Otorohanga timber? What is the cost of the part that automatically makes the packages at the start of the machine? From the spinning round table, to before the first shaper. And could it be adapted to suit a non TM machine?
This is not always easy to answer. Whereas we work with standard modules, hardly any line we produce is standard. Everything is customized to fit our customer's needs. If you have further questions, please contact one of our Sales Managers or one of our dealers: systemtm.com/contact/dealers/ They are always happy to help find the right solution 😊
why am i here youtube ?, why did you show this to me.
Awesome!
The best.
Probably just better to leave more knots in the boards, why take the knots out, safe this hassle 🙄 😑
Good to see it fully automated, this shit fucked up both collarbones back in the 90s,
Just leave the knots in them, over 20yrs of putting up with collarbone shoulder injuries 😑 totally not good, you wait til your shoulder goes and the doctor, physio etc will do nothing about it! Well load you up with exercise which doesn't really do anything! All because of this shit, fuck sakes, leave the fucken knots in the fucken boards! 😤
P
de domde es su empressa???
sorry for my stupid question, but why do you use these small pieces to join and not longer pieces?
Long pieces are expensive so - this machine makes valuable lengths from offcuts.
São retirados os defeitos das peças e montadas em peças grandes novamente. Essa técnica também confere estabilidade dimensional às peças compridas.
this set is how much?
@MiCROTEC - Innovating Wood Is there any machine to grade hardwood lumber based on its colour ratio ?
I dream of your machines!
Amazing technologies
Wow! Master piece; leaves not wanting more.
Whose crosscut optimizing saw is this?
This crosscut optimizing saw is located at a customer in Brazil
@@SystemTMDenmark sorry, I meant to ask who manufactures the actual crosscut optimizing saw that’s in sync with the scanner. The line looks fantastically, by the way. Great job you guys
@@flooringguy6691 System TM manufactures the crosscut saw. Microtec in Italy manufactures the scanner and in collaboration we optimize the line. If you want to know more, take a look at our website www.systemtm.com
@@SystemTMDenmark Got it. It’s your crosscut saw. Curious if it handle 1.150 x 10 5/8” (or even .880 x 10 5/8”)?
I hate this type of lumber. No real structural strength and it falls apart if it gets wet.
Genius set up
Price.??
Hello Ariyan - thank you for your interest in our company. To get a price at Opti-Joint H-200, please contact our sales department.
这一套下来多少钱
Well done!
What is the main difficulties in operation of this machine?
What kind of glue applicator is that can you make another video about trim saw head and glue applicator please I m excited to watch them 😀 thanks in advance. Awesome job
i could not see what or where the glue was applied ....
It clearly shows the glue application between 1:16 and 1:25
Pls tell us,how much money per 1 system?
Hello, What would this system cost today in Australia?
They copied your video at this link ua-cam.com/video/5Oqe8DRU2Vw/v-deo.html
Hi sir, May I know how the opti kap measure the length without golden eye scanner?
Muy buen sistema de Alimentación sincronizado con cadena perros
Go to 01:45 at speed 0.25 to see the defects being cut out of the planks.
So clean ! not like any of the process plants you will see here.
AMAZING...
The engine speed and compactness are very good performance. We can see it of the shaper part, the feeder part and the pressure part. Amazing..
Parabéns!
Congartulation👏👏👍👍very good line
good
Nice. I work on that line! :D
Top
Wow! That set-up is impressive! Great job:-)
Thanks Emil. We are also very satisfied of the solution. Have a great weekend.
@@SystemTMDenmark Hi could you Drop me an e-mail on mier.amitmalik@gmail.com
Now you can easily grade hardwood and optimize grading processes using high-speed scanning technology based on the NHLA grading rules.